impulse response

Updated notes for ece1229 antenna theory

March 16, 2015 ece1229 No comments , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

I’ve now posted a first update of my notes for the antenna theory course that I am taking this term at UofT.

Unlike most of the other classes I have taken, I am not attempting to take comprehensive notes for this class. The class is taught on slides which go by faster than I can easily take notes for (and some of which match the textbook closely). In class I have annotated my copy of textbook with little details instead. This set of notes contains musings of details that were unclear, or in some cases, details that were provided in class, but are not in the text (and too long to pencil into my book), as well as some notes Geometric Algebra formalism for Maxwell’s equations with magnetic sources (something I’ve encountered for the first time in any real detail in this class).

The notes compilation linked above includes all of the following separate notes, some of which have been posted separately on this blog:

Notes for ece1229 antenna theory

February 4, 2015 ece1229 No comments , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

I’ve now posted a first set of notes for the antenna theory course that I am taking this term at UofT.

Unlike most of the other classes I have taken, I am not attempting to take comprehensive notes for this class. The class is taught on slides that match the textbook so closely, there is little value to me taking notes that just replicate the text. Instead, I am annotating my copy of textbook with little details instead. My usual notes collection for the class will contain musings of details that were unclear, or in some cases, details that were provided in class, but are not in the text (and too long to pencil into my book.)

The notes linked above include:

  • Reading notes for chapter 2 (Fundamental Parameters of Antennas) and chapter 3 (Radiation Integrals and Auxiliary Potential Functions) of the class text.
  • Geometric Algebra musings.  How to do formulate Maxwell’s equations when magnetic sources are also included (those modeling magnetic dipoles).
  • Some problems for chapter 2 content.

Maxwell’s equations review (plus magnetic sources and currents)

January 28, 2015 ece1229 No comments , , , , , , , , , , ,

[Click here for a PDF of this post with nicer formatting]

These are notes for the UofT course ECE1229, Advanced Antenna Theory, taught by Prof. Eleftheriades, covering ch. 3 [1] content.

Unlike most of the other classes I have taken, I am not attempting to take comprehensive notes for this class. The class is taught on slides that match the textbook so closely, there is little value to me taking notes that just replicate the text. Instead, I am annotating my copy of textbook with little details instead. My usual notes collection for the class will contain musings of details that were unclear, or in some cases, details that were provided in class, but are not in the text (and too long to pencil into my book.)

Maxwell’s equation review

For reasons that are yet to be seen (and justified), we work with a generalization of Maxwell’s equations to include
electric AND magnetic charge densities.

\begin{equation}\label{eqn:chapter3Notes:20}
\spacegrad \cross \boldsymbol{\mathcal{E}} = – \boldsymbol{\mathcal{M}} – \PD{t}{\boldsymbol{\mathcal{B}}}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:40}
\spacegrad \cross \boldsymbol{\mathcal{H}} = \boldsymbol{\mathcal{J}} + \PD{t}{\boldsymbol{\mathcal{D}}}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:60}
\spacegrad \cdot \boldsymbol{\mathcal{D}} = \rho
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:80}
\spacegrad \cdot \boldsymbol{\mathcal{B}} = \rho_m.
\end{equation}

Assuming a phasor relationships of the form \( \boldsymbol{\mathcal{E}} =
\text{Real} \lr{ \BE(\Br) e^{j \omega t}} \) for the fields and the currents, these reduce to

\begin{equation}\label{eqn:chapter3Notes:100}
\spacegrad \cross \BE = – \BM – j \omega \BB
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:120}
\spacegrad \cross \BH = \BJ + j \omega \BD
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:140}
\spacegrad \cdot \BD = \rho
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:160}
\spacegrad \cdot \BB = \rho_m.
\end{equation}

In engineering the fields

  • \( \BE \) : Electric field intensity (V/m, Volts/meter).
  • \( \BH \) : Magnetic field intensity (A/m, Amperes/meter).

are designated primary fields, whereas

  • \( \BD \) : Electric flux density (or displacement vector) (C/m, {Coulombs/meter).
  • \( \BB \) : Magnetic flux density (W/m, Webers/meter).

are designated the induced fields. The currents and charges are

  • \( \BJ \) : Electric current density (A/m).
  • \( \BM \) : Magnetic current density (V/m).
  • \( \rho \) : Electric charge density (C/m^3).
  • \( \rho_m \) : Magnetic charge density (W/m^3).

Because \( \spacegrad \cdot \lr{ \spacegrad \cross \Bf } = 0 \) for any
(sufficiently continuous) vector \( \Bf \), divergence relations between the
currents and the charges follow from \ref{eqn:chapter3Notes:100}…

\begin{equation}\label{eqn:chapter3Notes:180}
0
= -\spacegrad \cdot \BM – j \omega \spacegrad \cdot \BB
= -\spacegrad \cdot \BM – j \omega \rho_m,
\end{equation}

and

\begin{equation}\label{eqn:chapter3Notes:200}
0
= \spacegrad \cdot \BJ + j \omega \spacegrad \cdot \BD
= \spacegrad \cdot \BJ + j \omega \rho,
\end{equation}

These are the phasor forms of the continuity equations

\begin{equation}\label{eqn:chapter3Notes:220}
\spacegrad \cdot \BM = – j \omega \rho_m
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:240}
\spacegrad \cdot \BJ = -j \omega \rho.
\end{equation}

Integral forms

The integral forms of Maxwell’s equations follow from Stokes’ theorem and the divergence theorems. Stokes’ theorem is a relation between the integral of the curl and the outwards normal differential area element of a surface, to the boundary of that surface, and applies to any surface with that boundary

\begin{equation}\label{eqn:chapter3Notes:260}
\iint
d\BA \cdot \lr{\spacegrad \cross \Bf}
= \oint \Bf \cdot d\Bl.
\end{equation}

The divergence theorem, a special case of the general Stokes’ theorem is

\begin{equation}\label{eqn:chapter3Notes:280}
\iiint_{V} \spacegrad \cdot \Bf dV
= \iint_{\partial V} \Bf \cdot d\BA,
\end{equation}

where the integral is over the surface of the volume, and the area element of the bounding integral has an outwards normal orientation.

See [5] for a derivation of this and various generalizations.

Applying these to Maxwell’s equations gives

\begin{equation}\label{eqn:chapter3Notes:320}
\oint d\Bl \cdot \BE = –
\iint d\BA \cdot \lr{
\BM + j \omega \BB
}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:340}
\oint d\Bl \cdot \BH =
\iint d\BA \cdot \lr{
\BJ + j \omega \BD
}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:360}
\iint_{\partial V} d\BA \cdot \BD = \iiint \rho dV
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:380}
\iint_{\partial V} d\BA \cdot \BB = \iiint \rho_m dV
\end{equation}

Constitutive relations

For linear isotropic homogeneous materials, the following constitutive relations apply

  • \( \BD = \epsilon \BE \)
  • \( \BB = \mu \BH \)
  • \( \BJ = \sigma \BE \), Ohm’s law.

where

  • \( \epsilon = \epsilon_r \epsilon_0\), is the permutivity (F/m, Farads/meter ).
  • \( \mu = \mu_r \mu_0 \), is the permeability (H/m, Henries/meter), \( \mu_0 = 4 \pi \times 10^{-7} \).
  • \( \sigma \), is the conductivity (\( \inv{\Omega m}\), where \( 1/\Omega \) is a Siemens.)

In AM radio, will see ferrite cores with the inductors, which introduces non-unit \( \mu_r \). This is to increase the radiation resistance.

Boundary conditions

For good electric conductor \( \BE = 0 \).
For good magnetic conductor \( \BB = 0 \).

(more on class slides)

Linear time invariant

Linear time invariant meant that the impulse response \( h(t,t’) \) was a function of just the difference in times \( h(t,t’) = h(t-t’) \).

Green’s functions

For electromagnetic problems the impulse function sources \( \delta(\Br – \Br’) \) also has a direction, and can yield any of \( E_x, E_y, E_z \). A tensor impulse response is required.

Some overview of an approach that uses such tensor Green’s functions is outlined on the slides. It gets really messy since we require four tensor Green’s functions to handle electric and magnetic current and charges. Because of this complexity, we don’t go down this path, and use potentials instead.

In \S 3.5 [1] and the class notes, a verification of the spherical wave form for the Helmholtz Green’s function was developed. This was much simpler than the same verification I did in [4]. Part of the reason for that was that I worked in Cartesian coordinates, which made things much messier. The other part of the reason, for treating a neighbourhood of \( \Abs{\Br – \Br’} \sim 0 \), I verified the convolution, whereas Prof. Eleftheriades argues that a verification that \( \int \lr{\spacegrad^2 + k^2} G(\Br, \Br’) dV’ = 1\) is sufficient. Balanis, on the other hand, argues that knowing the solution for \( k \ne 0 \) must just be the solution for \( k = 0 \) (i.e. the Poisson solution) provided it is multiplied by the \( e^{-j k r} \) factor.

Note that back when I did that derivation, I used a different sign convention for the Green’s function, and in QM we used a positive sign instead of the negative in \( e^{-j k r } \).

Notation

  • Phasor frequency terms are written as \( e^{j \omega t} \), not \( e^{-j \omega t} \), as done in physics. I didn’t recall that this was always the case in physics, and wouldn’t have assumed it. This is the case in both [3] and [2]. The latter however, also uses \( \cos(\omega t – k r) \) for spherical waves possibly implying an alternate phasor sign convention in that content, so I’d be wary about trusting any absolute “engineering” vs. physics sign convention without checking carefully.
  • In Green’s functions \( G(\Br, \Br’) \), \( \Br \) is the point of observation, and \( \Br’ \) is the point in the convolution integration space.
  • Both \( \BM \) and \( \BJ_m \) are used for magnetic current sources in the class notes.

References

[1] Constantine A Balanis. Antenna theory: analysis and design. John Wiley \& Sons, 3rd edition, 2005.

[2] David Jeffrey Griffiths and Reed College. Introduction to electrodynamics, chapter {Electromagnetic Waves}. Prentice hall Upper Saddle River, NJ, 3rd edition, 1999.

[3] JD Jackson. Classical Electrodynamics, chapter {Simple Radiating Systems, Scattering, and Diffraction}. John Wiley and Sons, 2nd edition, 1975.

[4] Peeter Joot. Quantum Mechanics II., chapter {Verifying the Helmholtz Green’s function.} peeterjoot.com, 2011. URL http://peeterjoot.com/archives/math2011/phy456.pdf. [Online; accessed 28-January-2015].

[5] Peeter Joot. Exploring physics with Geometric Algebra, chapter {Stokes theorem}. peeterjoot.com, 2014. URL http://peeterjoot.com/archives/math2009/gabook.pdf. [Online; accessed 28-January-2015].