bivector

Solving Maxwell’s equation in freespace: Multivector plane wave representation

March 14, 2018 math and physics play , , , , , , , , , , , ,

[Click here for a PDF of this post with nicer formatting]

The geometric algebra form of Maxwell’s equations in free space (or source free isotopic media with group velocity \( c \)) is the multivector equation
\begin{equation}\label{eqn:planewavesMultivector:20}
\lr{ \spacegrad + \inv{c}\PD{t}{} } F(\Bx, t) = 0.
\end{equation}
Here \( F = \BE + I c \BB \) is a multivector with grades 1 and 2 (vector and bivector components). The velocity \( c \) is called the group velocity since \( F \), or its components \( \BE, \BH \) satisfy the wave equation, which can be seen by pre-multiplying with \( \spacegrad – (1/c)\PDi{t}{} \) to find
\begin{equation}\label{eqn:planewavesMultivector:n}
\lr{ \spacegrad^2 – \inv{c^2}\PDSq{t}{} } F(\Bx, t) = 0.
\end{equation}

Let’s look at the frequency domain solution of this equation with a presumed phasor representation
\begin{equation}\label{eqn:planewavesMultivector:40}
F(\Bx, t) = \textrm{Re} \lr{ F(\Bk) e^{-j \Bk \cdot \Bx + j \omega t} },
\end{equation}
where \( j \) is a scalar imaginary, not necessarily with any geometric interpretation.

Maxwell’s equation reduces to just
\begin{equation}\label{eqn:planewavesMultivector:60}
0
=
-j \lr{ \Bk – \frac{\omega}{c} } F(\Bk).
\end{equation}

If \( F(\Bk) \) has a left multivector factor
\begin{equation}\label{eqn:planewavesMultivector:80}
F(\Bk) =
\lr{ \Bk + \frac{\omega}{c} } \tilde{F},
\end{equation}
where \( \tilde{F} \) is a multivector to be determined, then
\begin{equation}\label{eqn:planewavesMultivector:100}
\begin{aligned}
\lr{ \Bk – \frac{\omega}{c} }
F(\Bk)
&=
\lr{ \Bk – \frac{\omega}{c} }
\lr{ \Bk + \frac{\omega}{c} } \tilde{F} \\
&=
\lr{ \Bk^2 – \lr{\frac{\omega}{c}}^2 } \tilde{F},
\end{aligned}
\end{equation}
which is zero if \( \Norm{\Bk} = \ifrac{\omega}{c} \).

Let \( \kcap = \ifrac{\Bk}{\Norm{\Bk}} \), and \( \Norm{\Bk} \tilde{F} = F_0 + F_1 + F_2 + F_3 \), where \( F_0, F_1, F_2, \) and \( F_3 \) are respectively have grades 0,1,2,3. Then
\begin{equation}\label{eqn:planewavesMultivector:120}
\begin{aligned}
F(\Bk)
&= \lr{ 1 + \kcap } \lr{ F_0 + F_1 + F_2 + F_3 } \\
&=
F_0 + F_1 + F_2 + F_3
+
\kcap F_0 + \kcap F_1 + \kcap F_2 + \kcap F_3 \\
&=
F_0 + F_1 + F_2 + F_3
+
\kcap F_0 + \kcap \cdot F_1 + \kcap \cdot F_2 + \kcap \cdot F_3
+
\kcap \wedge F_1 + \kcap \wedge F_2 \\
&=
\lr{
F_0 + \kcap \cdot F_1
}
+
\lr{
F_1 + \kcap F_0 + \kcap \cdot F_2
}
+
\lr{
F_2 + \kcap \cdot F_3 + \kcap \wedge F_1
}
+
\lr{
F_3 + \kcap \wedge F_2
}.
\end{aligned}
\end{equation}
Since the field \( F \) has only vector and bivector grades, the grades zero and three components of the expansion above must be zero, or
\begin{equation}\label{eqn:planewavesMultivector:140}
\begin{aligned}
F_0 &= – \kcap \cdot F_1 \\
F_3 &= – \kcap \wedge F_2,
\end{aligned}
\end{equation}
so
\begin{equation}\label{eqn:planewavesMultivector:160}
\begin{aligned}
F(\Bk)
&=
\lr{ 1 + \kcap } \lr{
F_1 – \kcap \cdot F_1 +
F_2 – \kcap \wedge F_2
} \\
&=
\lr{ 1 + \kcap } \lr{
F_1 – \kcap F_1 + \kcap \wedge F_1 +
F_2 – \kcap F_2 + \kcap \cdot F_2
}.
\end{aligned}
\end{equation}
The multivector \( 1 + \kcap \) has the projective property of gobbling any leading factors of \( \kcap \)
\begin{equation}\label{eqn:planewavesMultivector:180}
\begin{aligned}
(1 + \kcap)\kcap
&= \kcap + 1 \\
&= 1 + \kcap,
\end{aligned}
\end{equation}
so for \( F_i \in F_1, F_2 \)
\begin{equation}\label{eqn:planewavesMultivector:200}
(1 + \kcap) ( F_i – \kcap F_i )
=
(1 + \kcap) ( F_i – F_i )
= 0,
\end{equation}
leaving
\begin{equation}\label{eqn:planewavesMultivector:220}
F(\Bk)
=
\lr{ 1 + \kcap } \lr{
\kcap \cdot F_2 +
\kcap \wedge F_1
}.
\end{equation}

For \( \kcap \cdot F_2 \) to be non-zero \( F_2 \) must be a bivector that lies in a plane containing \( \kcap \), and \( \kcap \cdot F_2 \) is a vector in that plane that is perpendicular to \( \kcap \). On the other hand \( \kcap \wedge F_1 \) is non-zero only if \( F_1 \) has a non-zero component that does not lie in along the \( \kcap \) direction, but \( \kcap \wedge F_1 \), like \( F_2 \) describes a plane that containing \( \kcap \). This means that having both bivector and vector free variables \( F_2 \) and \( F_1 \) provide more degrees of freedom than required. For example, if \( \BE \) is any vector, and \( F_2 = \kcap \wedge \BE \), then
\begin{equation}\label{eqn:planewavesMultivector:240}
\begin{aligned}
\lr{ 1 + \kcap }
\kcap \cdot F_2
&=
\lr{ 1 + \kcap }
\kcap \cdot \lr{ \kcap \wedge \BE } \\
&=
\lr{ 1 + \kcap }
\lr{
\BE
–
\kcap \lr{ \kcap \cdot \BE }
} \\
&=
\lr{ 1 + \kcap }
\kcap \lr{ \kcap \wedge \BE } \\
&=
\lr{ 1 + \kcap }
\kcap \wedge \BE,
\end{aligned}
\end{equation}
which has the form \( \lr{ 1 + \kcap } \lr{ \kcap \wedge F_1 } \), so the solution of the free space Maxwell’s equation can be written
\begin{equation}\label{eqn:planewavesMultivector:260}
\boxed{
F(\Bx, t)
=
\textrm{Re} \lr{
\lr{ 1 + \kcap }
\BE\,
e^{-j \Bk \cdot \Bx + j \omega t}
}
,
}
\end{equation}
where \( \BE \) is any vector for which \( \BE \cdot \Bk = 0 \).

The many faces of Maxwell’s equations

March 5, 2018 math and physics play , , , , , , , , , , , , , , , , , , , , , , , ,

[Click here for a PDF of this post with nicer formatting (including equation numbering and references)]

The following is a possible introduction for a report for a UofT ECE2500 project associated with writing a small book: “Geometric Algebra for Electrical Engineers”. Given the space constraints for the report I may have to drop much of this, but some of the history of Maxwell’s equations may be of interest, so I thought I’d share before the knife hits the latex.

Goals of the project.

This project had a few goals

  1. Perform a literature review of applications of geometric algebra to the study of electromagnetism. Geometric algebra will be defined precisely later, along with bivector, trivector, multivector and other geometric algebra generalizations of the vector.
  2. Identify the subset of the literature that had direct relevance to electrical engineering.
  3. Create a complete, and as compact as possible, introduction of the prerequisites required
    for a graduate or advanced undergraduate electrical engineering student to be able to apply
    geometric algebra to problems in electromagnetism.

The many faces of electromagnetism.

There is a long history of attempts to find more elegant, compact and powerful ways of encoding and working with Maxwell’s equations.

Maxwell’s formulation.

Maxwell [12] employs some differential operators, including the gradient \( \spacegrad \) and Laplacian \( \spacegrad^2 \), but the divergence and gradient are always written out in full using coordinates, usually in integral form. Reading the original Treatise highlights how important notation can be, as most modern engineering or physics practitioners would find his original work incomprehensible. A nice translation from Maxwell’s notation to the modern Heaviside-Gibbs notation can be found in [16].

Quaterion representation.

In his second volume [11] the equations of electromagnetism are stated using quaterions (an extension of complex numbers to three dimensions), but quaternions are not used in the work. The modern form of Maxwell’s equations in quaternion form is
\begin{equation}\label{eqn:ece2500report:220}
\begin{aligned}
\inv{2} \antisymmetric{ \frac{d}{dr} }{ \BH } – \inv{2} \symmetric{ \frac{d}{dr} } { c \BD } &= c \rho + \BJ \\
\inv{2} \antisymmetric{ \frac{d}{dr} }{ \BE } + \inv{2} \symmetric{ \frac{d}{dr} }{ c \BB } &= 0,
\end{aligned}
\end{equation}
where \( \ifrac{d}{dr} = (1/c) \PDi{t}{} + \Bi \PDi{x}{} + \Bj \PDi{y}{} + \Bk \PDi{z}{} \) [7] acts bidirectionally, and vectors are expressed in terms of the quaternion basis \( \setlr{ \Bi, \Bj, \Bk } \), subject to the relations \(
\Bi^2 = \Bj^2 = \Bk^2 = -1, \quad
\Bi \Bj = \Bk = -\Bj \Bi, \quad
\Bj \Bk = \Bi = -\Bk \Bj, \quad
\Bk \Bi = \Bj = -\Bi \Bk \).
There is clearly more structure to these equations than the traditional Heaviside-Gibbs representation that we are used to, which says something for the quaternion model. However, this structure requires notation that is arguably non-intuitive. The fact that the quaterion representation was abandoned long ago by most electromagnetism researchers and engineers supports such an argument.

Minkowski tensor representation.

Minkowski introduced the concept of a complex time coordinate \( x_4 = i c t \) for special relativity [3]. Such a four-vector representation can be used for many of the relativistic four-vector pairs of electromagnetism, such as the current \((c\rho, \BJ)\), and the energy-momentum Lorentz force relations, and can also be applied to Maxwell’s equations
\begin{equation}\label{eqn:ece2500report:140}
\sum_{\mu= 1}^4 \PD{x_\mu}{F_{\mu\nu}} = – 4 \pi j_\nu.
\qquad
\sum_{\lambda\rho\mu=1}^4
\epsilon_{\mu\nu\lambda\rho}
\PD{x_\mu}{F_{\lambda\rho}} = 0,
\end{equation}
where
\begin{equation}\label{eqn:ece2500report:160}
F
=
\begin{bmatrix}
0 & B_z & -B_y & -i E_x \\
-B_z & 0 & B_x & -i E_y \\
B_y & -B_x & 0 & -i E_z \\
i E_x & i E_y & i E_z & 0
\end{bmatrix}.
\end{equation}
A rank-2 complex (Hermitian) tensor contains all six of the field components. Transformation of coordinates for this representation of the field may be performed exactly like the transformation for any other four-vector. This formalism is described nicely in [13], where the structure used is motivated by transformational requirements. One of the costs of this tensor representation is that we loose the clear separation of the electric and magnetic fields that we are so comfortable with. Another cost is that we loose the distinction between space and time, as separate space and time coordinates have to be projected out of a larger four vector. Both of these costs have theoretical benefits in some applications, particularly for high energy problems where relativity is important, but for the low velocity problems near and dear to electrical engineers who can freely treat space and time independently, the advantages are not clear.

Modern tensor formalism.

The Minkowski representation fell out of favour in theoretical physics, which settled on a real tensor representation that utilizes an explicit metric tensor \( g_{\mu\nu} = \pm \textrm{diag}(1, -1, -1, -1) \) to represent the complex inner products of special relativity. In this tensor formalism, Maxwell’s equations are also reduced to a set of two tensor relationships ([10], [8], [5]).
\begin{equation}\label{eqn:ece2500report:40}
\begin{aligned}
\partial_\mu F^{\mu \nu} &= \mu_0 J^\nu \\
\epsilon^{\alpha \beta \mu \nu} \partial_\beta F_{\mu \nu} &= 0,
\end{aligned}
\end{equation}
where \( F^{\mu\nu} \) is a \textit{real} rank-2 antisymmetric tensor that contains all six electric and magnetic field components, and \( J^\nu \) is a four-vector current containing both charge density and current density components. \Cref{eqn:ece2500report:40} provides a unified and simpler theoretical framework for electromagnetism, and is used extensively in physics but not engineering.

Differential forms.

It has been argued that a differential forms treatment of electromagnetism provides some of the same theoretical advantages as the tensor formalism, without the disadvantages of introducing a hellish mess of index manipulation into the mix. With differential forms it is also possible to express Maxwell’s equations as two equations. The free-space differential forms equivalent [4] to the tensor equations is
\begin{equation}\label{eqn:ece2500report:60}
\begin{aligned}
d \alpha &= 0 \\
d *\alpha &= 0,
\end{aligned}
\end{equation}
where
\begin{equation}\label{eqn:ece2500report:180}
\alpha = \lr{ E_1 dx^1 + E_2 dx^2 + E_3 dx^3 }(c dt) + H_1 dx^2 dx^3 + H_2 dx^3 dx^1 + H_3 dx^1 dx^2.
\end{equation}
One of the advantages of this representation is that it is valid even for curvilinear coordinate representations, which are handled naturally in differential forms. However, this formalism also comes with a number of costs. One cost (or benefit), like that of the tensor formalism, is that this is implicitly a relativistic approach subject to non-Euclidean orthonormality conditions \( (dx^i, dx^j) = \delta^{ij}, (dx^i, c dt) = 0, (c dt, c dt) = -1 \). Most grievous of the costs is the requirement to use differentials \( dx^1, dx^2, dx^3, c dt \), instead of a more familar set of basis vectors, even for non-curvilinear coordinates. This requirement is easily viewed as unnatural, and likely one of the reasons that electromagnetism with differential forms has never become popular.

Vector formalism.

Euclidean vector algebra, in particular the vector algebra and calculus of \( R^3 \), is the de-facto language of electrical engineering for electromagnetism. Maxwell’s equations in the Heaviside-Gibbs vector formalism are
\begin{equation}\label{eqn:ece2500report:20}
\begin{aligned}
\spacegrad \cross \BE &= – \PD{t}{\BB} \\
\spacegrad \cross \BH &= \BJ + \PD{t}{\BD} \\
\spacegrad \cdot \BD &= \rho \\
\spacegrad \cdot \BB &= 0.
\end{aligned}
\end{equation}
We are all intimately familiar with these equations, with the dot and the cross products, and with gradient, divergence and curl operations that are used to express them.
Given how comfortable we are with this mathematical formalism, there has to be a really good reason to switch to something else.

Space time algebra (geometric algebra).

An alternative to any of the electrodynamics formalisms described above is STA, the Space Time Algebra. STA is a relativistic geometric algebra that allows Maxwell’s equations to be combined into one equation ([2], [6])
\begin{equation}\label{eqn:ece2500report:80}
\grad F = J,
\end{equation}
where
\begin{equation}\label{eqn:ece2500report:200}
F = \BE + I c \BB \qquad (= \BE + I \eta \BH)
\end{equation}
is a bivector field containing both the electric and magnetic field “vectors”, \( \grad = \gamma^\mu \partial_\mu \) is the spacetime gradient, \( J \) is a four vector containing electric charge and current components, and \( I = \gamma_0 \gamma_1 \gamma_2 \gamma_3 \) is the spacetime pseudoscalar, the ordered product of the basis vectors \( \setlr{ \gamma_\mu } \). The STA representation is explicitly relativistic with a non-Euclidean relationships between the basis vectors \( \gamma_0 \cdot \gamma_0 = 1 = -\gamma_k \cdot \gamma_k, \forall k > 0 \). In this formalism “spatial” vectors \( \Bx = \sum_{k>0} \gamma_k \gamma_0 x^k \) are represented as spacetime bivectors, requiring a small slight of hand when switching between STA notation and conventional vector representation. Uncoincidentally \( F \) has exactly the same structure as the 2-form \(\alpha\) above, provided the differential 1-forms \( dx^\mu \) are replaced by the basis vectors \( \gamma_\mu \). However, there is a simple complex structure inherent in the STA form that is not obvious in the 2-form equivalent. The bivector representation of the field \( F \) directly encodes the antisymmetric nature of \( F^{\mu\nu} \) from the tensor formalism, and the tensor equivalents of most STA results can be calcualted easily.

Having a single PDE for all of Maxwell’s equations allows for direct Green’s function solution of the field, and has a number of other advantages. There is extensive literature exploring selected applications of STA to electrodynamics. Many theoretical results have been derived using this formalism that require significantly more complex approaches using conventional vector or tensor analysis. Unfortunately, much of the STA literature is inaccessible to the engineering student, practising engineers, or engineering instructors. To even start reading the literature, one must learn geometric algebra, aspects of special relativity and non-Euclidean geometry, generalized integration theory, and even some tensor analysis.

Paravector formalism (geometric algebra).

In the geometric algebra literature, there are a few authors who have endorsed the use of Euclidean geometric algebras for relativistic applications ([1], [14])
These authors use an Euclidean basis “vector” \( \Be_0 = 1 \) for the timelike direction, along with a standard Euclidean basis \( \setlr{ \Be_i } \) for the spatial directions. A hybrid scalar plus vector representation of four vectors, called paravectors is employed. Maxwell’s equation is written as a multivector equation
\begin{equation}\label{eqn:ece2500report:120}
\lr{ \spacegrad + \inv{c} \PD{t}{} } F = J,
\end{equation}
where \( J \) is a multivector source containing both the electric charge and currents, and \( c \) is the group velocity for the medium (assumed uniform and isometric). \( J \) may optionally include the (fictitious) magnetic charge and currents useful in antenna theory. The paravector formalism uses a the hybrid electromagnetic field representation of STA above, however, \( I = \Be_1 \Be_2 \Be_3 \) is interpreted as the \( R^3 \) pseudoscalar, the ordered product of the basis vectors \( \setlr{ \Be_i } \), and \( F \) represents a multivector with vector and bivector components. Unlike STA where \( \BE \) and \( \BB \) (or \( \BH \)) are interpretted as spacetime bivectors, here they are plain old Euclidian vectors in \( R^3 \), entirely consistent with conventional Heaviyside-Gibbs notation. Like the STA Maxwell’s equation, the paravector form is directly invertible using Green’s function techniques, without requiring the solution of equivalent second order potential problems, nor any requirement to take the derivatives of those potentials to determine the fields.

Lorentz transformation and manipulation of paravectors requires a variety of conjugation, real and imaginary operators, unlike STA where such operations have the same complex exponential structure as any 3D rotation expressed in geometric algebra. The advocates of the paravector representation argue that this provides an effective pedagogical bridge from Euclidean geometry to the Minkowski geometry of special relativity. This author agrees that this form of Maxwell’s equations is the natural choice for an introduction to electromagnetism using geometric algebra, but for relativistic operations, STA is a much more natural and less confusing choice.

Results.

The end product of this project was a fairly small self contained book, titled “Geometric Algebra for Electrical Engineers”. This book includes an introduction to Euclidean geometric algebra focused on \( R^2 \) and \( R^3 \) (64 pages), an introduction to geometric calculus and multivector Green’s functions (64 pages), and applications to electromagnetism (75 pages). This report summarizes results from this book, omitting most derivations, and attempts to provide an overview that may be used as a road map for the book for further exploration. Many of the fundamental results of electromagnetism are derived directly from the geometric algebra form of Maxwell’s equation in a streamlined and compact fashion. This includes some new results, and many of the existing non-relativistic results from the geometric algebra STA and paravector literature. It will be clear to the reader that it is often simpler to have the electric and magnetic on equal footing, and demonstrates this by deriving most results in terms of the total electromagnetic field \( F \). Many examples of how to extract the conventional electric and magnetic fields from the geometric algebra results expressed in terms of \( F \) are given as a bridge between the multivector and vector representations.

The aim of this work was to remove some of the prerequisite conceptual roadblocks that make electromagnetism using geometric algebra inaccessbile. In particular, this project explored non-relativistic applications of geometric algebra to electromagnetism. After derivation from the conventional Heaviside-Gibbs representation of Maxwell’s equations, the paravector representation of Maxwell’s equation is used as the starting point for of all subsequent analysis. However, the paravector literature includes a confusing set of conjugation and real and imaginary selection operations that are tailored for relativisitic applications. These are not neccessary for low velocity applications, and have been avoided completely with the aim of making the subject more accessibility to the engineer.

In the book an attempt has been made to avoid introducing as little new notation as possible. For example, some authors use special notation for the bivector valued magnetic field \( I \BB \), such as \( \boldsymbol{\mathcal{b}} \) or \( \Bcap \). Given the inconsistencies in the literature, \( I \BB \) (or \( I \BH \)) will be used explicitly for the bivector (magnetic) components of the total electromagnetic field \( F \). In the geometric algebra literature, there are conflicting conventions for the operator \( \spacegrad + (1/c) \PDi{t}{} \) which we will call the spacetime gradient after the STA equivalent. For examples of different notations for the spacetime gradient, see [9], [1], and [15]. In the book the spacetime gradient is always written out in full to avoid picking from or explaining some of the subtlties of the competing notations.

Some researchers will find it distasteful that STA and relativity have been avoided completely in this book. Maxwell’s equations are inherently relativistic, and STA expresses the relativistic aspects of electromagnetism in an exceptional and beautiful fashion. However, a student of this book will have learned the geometric algebra and calculus prerequisites of STA. This makes the STA literature much more accessible, especially since most of the results in the book can be trivially translated into STA notation.

References

[1] William Baylis. Electrodynamics: a modern geometric approach, volume 17. Springer Science \& Business Media, 2004.

[2] C. Doran and A.N. Lasenby. Geometric algebra for physicists. Cambridge University Press New York, Cambridge, UK, 1st edition, 2003.

[3] Albert Einstein. Relativity: The special and the general theory, chapter Minkowski’s Four-Dimensional Space. Princeton University Press, 2015. URL http://www.gutenberg.org/ebooks/5001.

[4] H. Flanders. Differential Forms With Applications to the Physical Sciences. Courier Dover Publications, 1989.

[5] David Jeffrey Griffiths and Reed College. Introduction to electrodynamics. Prentice hall Upper Saddle River, NJ, 3rd edition, 1999.

[6] David Hestenes. Space-time algebra, volume 1. Springer, 1966.

[7] Peter Michael Jack. Physical space as a quaternion structure, i: Maxwell equations. a brief note. arXiv preprint math-ph/0307038, 2003. URL https://arxiv.org/abs/math-ph/0307038.

[8] JD Jackson. Classical Electrodynamics. John Wiley and Sons, 2nd edition, 1975.

[9] Bernard Jancewicz. Multivectors and Clifford algebra in electrodynamics. World Scientific, 1988.

[10] L.D. Landau and E.M. Lifshitz. The classical theory of fields. Butterworth-Heinemann, 1980. ISBN 0750627689.

[11] James Clerk Maxwell. A treatise on electricity and magnetism, volume II. Merchant Books, 1881.

[12] James Clerk Maxwell. A treatise on electricity and magnetism, third edition, volume I. Dover publications, 1891.

[13] M. Schwartz. Principles of Electrodynamics. Dover Publications, 1987.

[14] Chappell et al. A simplified approach to electromagnetism using geometric algebra. arXiv preprint arXiv:1010.4947, 2010.

[15] Chappell et al. Geometric algebra for electrical and electronic engineers. 2014.

[16] Chappell et al. Geometric Algebra for Electrical and Electronic Engineers, 2014

A derivation of the quaternion Maxwell’s equations using geometric algebra.

March 5, 2018 math and physics play , , , , , , ,

[Click here for a PDF of this post with nicer formatting]

Motivation.

The quaternion form of Maxwell’s equations as stated in [2] is nearly indecipherable. The modern quaternionic form of these equations can be found in [1]. Looking for this representation was driven by the question of whether or not the compact geometric algebra representations of Maxwell’s equations \( \grad F = J \), was possible using a quaternion representation of the fields.

As quaternions may be viewed as the even subalgebra of GA(3,0), it is possible to the quaternion representation of Maxwell’s equations using only geometric algebra, including source terms and independent of the heat considerations discussed in [1]. Such a derivation will be performed here. Examination of the results appears to answer the question about the compact representation in the negative.

Quaternions as multivectors.

Quaternions are vector plus scalar sums, where the vector basis \( \setlr{ \Bi, \Bj, \Bk } \) are subject to the complex like multiplication rules
\begin{equation}\label{eqn:complex:240}
\begin{aligned}
\Bi^2 &= \Bj^2 = \Bk^2 = -1 \\
\Bi \Bj &= \Bk = -\Bj \Bi \\
\Bj \Bk &= \Bi = -\Bk \Bj \\
\Bk \Bi &= \Bj = -\Bi \Bk.
\end{aligned}
\end{equation}

We can represent these basis vectors in terms of the \(\mathbb{R}^{3}\) unit bivectors
\begin{equation}\label{eqn:quaternion2maxwellWithGA:260}
\begin{aligned}
\Bi &= \Be_{3} \Be_{2} = -I \Be_1 \\
\Bj &= \Be_{1} \Be_{3} = -I \Be_2 \\
\Bk &= \Be_{2} \Be_{1} = -I \Be_3,
\end{aligned}
\end{equation}
where \( I = \Be_1 \Be_2 \Be_3 \) is the ordered product of the \(\mathbb{R}^{3}\) basis elements. Within geometric algebra, the quaternion basis “vectors” are more properly viewed as a bivector space basis that happens to have dimension three.

Similar to [1] (which used \(d/dr\), whereas \(d/dX\) is used here to invoke the connection to a relativistic four vector \(X = (c t, \mathbf{x})\)), we may introduce a quaternionic spacetime gradient, and express that in terms of geometric algebra
\begin{equation}\label{eqn:quaternion2maxwellWithGA:280}
\frac{d}{dX} = \inv{c} \PD{t}{}
+ \Bi \PD{x}{}
+ \Bj \PD{y}{}
+ \Bk \PD{z}{}
=
\inv{c}\PD{t}{} -I \spacegrad.
\end{equation}

Of particular interest is how do we write the curl, divergence and time partials in terms of the quaternionic spacetime gradient or its components. Like [1], we will use modern commutator notation for an antisymmetric difference of products
\begin{equation}\label{eqn:quaternion2maxwellWithGA:600}
\antisymmetric{a}{b} = a b – b a,
\end{equation}
and anticommutator notation for a symmetric difference of products
\begin{equation}\label{eqn:quaternion2maxwellWithGA:620}
\symmetric{a}{b} = a b + b a.
\end{equation}
The curl of a vector \( \Bf \) in terms of vector products with the gradient is
\begin{equation}\label{eqn:quaternion2maxwellWithGA:300}
\begin{aligned}
\spacegrad \cross \Bf
&= -I(\spacegrad \wedge \Bf) \\
&= -\frac{I}{2} \lr{ \spacegrad \Bf – \Bf \spacegrad } \\
&= \frac{1}{2} \lr{ (-I \spacegrad) \Bf – \Bf (-I\spacegrad) } \\
&= \inv{2} \antisymmetric{ -I \spacegrad }{ \Bf } \\
&= \inv{2} \antisymmetric{ \frac{d}{dX} }{ \Bf },
\end{aligned}
\end{equation}
where the last step takes advantage of the fact that the timelike contribution of the spacetime gradient commutes with any vector \( \Bf \) due to its scalar nature, so cancels out of the commutator. In a similar fashion, the dot product may be written as an anticommutator
\begin{equation}\label{eqn:quaternion2maxwellWithGA:480}
\spacegrad \cdot \Bf
=
\inv{2} \lr{ \spacegrad \Bf + \Bf \spacegrad }
=
\inv{2} \symmetric{ \spacegrad}{ \Bf },
\end{equation}
as can the scalar time derivative
\begin{equation}\label{eqn:quaternion2maxwellWithGA:500}
\PD{t}{\Bf}
= \inv{2} \symmetric{ \inv{c} \PD{t}{} } { c \Bf }.
\end{equation}

Quaternionic form of Maxwell’s equations.

Using geometric algebra as an intermediate transformation, let’s see directly how to express Maxwell’s equations in terms of this quaternionic operator. Our starting point is Maxwell’s equations in their standard macroscopic form

\begin{equation}\label{eqn:ece2500report:20}
\spacegrad \cross \BH = \BJ + \PD{t}{\BD}
\end{equation}
\begin{equation}\label{eqn:quaternion2maxwellWithGA:340}
\spacegrad \cdot \BD = \rho
\end{equation}
\begin{equation}\label{eqn:quaternion2maxwellWithGA:360}
\spacegrad \cross \BE = – \PD{t}{\BB}
\end{equation}
\begin{equation}\label{eqn:quaternion2maxwellWithGA:380}
\spacegrad \cdot \BB = 0.
\end{equation}

Inserting these into Maxwell-Faraday and into Gauss’s law for magnetism we have
\begin{equation}\label{eqn:quaternion2maxwellWithGA:400}
\begin{aligned}
\inv{2} \antisymmetric{ \frac{d}{dX} }{ \BE } &= – \symmetric{ \inv{c}\PD{t}{} }{ c \BB } \\
\inv{2} \symmetric{ \spacegrad }{ c \BB } &= 0,
\end{aligned}
\end{equation}
or
\begin{equation}\label{eqn:quaternion2maxwellWithGA:420}
\begin{aligned}
\inv{2} \antisymmetric{ \frac{d}{dX} }{ -I \BE } + \symmetric{ \inv{c}\PD{t}{} }{ -I c \BB } &= 0 \\
\inv{2} \symmetric{ -I \spacegrad }{ -I c \BB } &= 0
\end{aligned}
\end{equation}
We can introduce quaternionic electric and magnetic field “vectors” (really bivectors)
\begin{equation}\label{eqn:quaternion2maxwellWithGA:440}
\begin{aligned}
\boldsymbol{\mathcal{E}} &= -I \BE = \Bi E_x + \Bj E_y + \Bk E_z \\
\boldsymbol{\mathcal{B}} &= -I \BB = \Bi B_x + \Bj B_y + \Bk B_z,
\end{aligned}
\end{equation}
and substitute these and sum to find the quaternionic representation of the two source free Maxwell’s equations
\begin{equation}\label{eqn:quaternion2maxwellWithGA:460}
\boxed{
\inv{2} \antisymmetric{ \frac{d}{dX} }{ \boldsymbol{\mathcal{E}} } + \inv{2} \symmetric{ \frac{d}{dX} }{ c \boldsymbol{\mathcal{B}} } = 0.
}
\end{equation}

Inserting the quaternion curl, div and time derivative representations into Ampere-Maxwell’s law and Gauss’s law, gives
\begin{equation}\label{eqn:quaternion2maxwellWithGA:520}
\begin{aligned}
\inv{2} \antisymmetric{ \frac{d}{dX} }{ \BH } &= \BJ + \inv{2} \symmetric{ \inv{c} \PD{t}{} } { c \BD } \\
\inv{2} \symmetric{ \spacegrad }{ c \BD } &= c \rho,
\end{aligned}
\end{equation}
\begin{equation}\label{eqn:quaternion2maxwellWithGA:540}
\begin{aligned}
\inv{2} \antisymmetric{ \frac{d}{dX} }{ -I \BH } – \inv{2} \symmetric{ \inv{c} \PD{t}{} } { -I c \BD } &= -I \BJ \\
-\inv{2} \symmetric{ -I \spacegrad }{ -I c \BD } &= c \rho.
\end{aligned}
\end{equation}
With quaternionic displacement vector and magnetization, and current densities
\begin{equation}\label{eqn:quaternion2maxwellWithGA:580}
\begin{aligned}
\boldsymbol{\mathcal{D}} &= -I \BD = \Bi D_x + \Bj D_y + \Bk D_z \\
\boldsymbol{\mathcal{H}} &= -I \BH = \Bi H_x + \Bj H_y + \Bk H_z \\
\boldsymbol{\mathcal{J}} &= -I \BJ = \Bi J_x + \Bj J_y + \Bk J_z,
\end{aligned}
\end{equation}
and summing yields the two remaining two Maxwell equations in their quaternionic form
\begin{equation}\label{eqn:quaternion2maxwellWithGA:560}
\boxed{
\inv{2} \antisymmetric{ \frac{d}{dX} }{ \boldsymbol{\mathcal{H}} } – \inv{2} \symmetric{ \frac{d}{dX} } { c \boldsymbol{\mathcal{D}} } = c \rho + \boldsymbol{\mathcal{J}}.
}
\end{equation}

Conclusions.

Maxwell’s equations in the quaternion representation have a structure that is not apparent in the Heaviside-Gibbs notation. There is some elegance to this result, but comes with the cost of having to use commutator and anticommutator operators, which are arguably non-intuitive. The compact geometric algebra representation of Maxwell’s equation does not appear possible with a quaternion representation, as an additional complex degree of freedom would be required (biquaternions?) Such a degree of freedom may also allow a quaternion representation of the (fictitious) magnetic sources that are useful in antenna theory with a quaternion model. Magnetic sources are easily incorporated into the current multivector in geometric algebra, but if done so in the derivation above, yield an odd grade multivector source which has no quaternion representation.

References

[1] Peter Michael Jack. Physical space as a quaternion structure, i: Maxwell equations. a brief note. arXiv preprint math-ph/0307038, 2003. URL https://arxiv.org/abs/math-ph/0307038.

[2] James Clerk Maxwell. A treatise on electricity and magnetism, volume II. Merchant Books, 1881.

A comparison of Geometric Algebra electrodynamic potential methods

January 7, 2017 math and physics play , , , , , , , , , , , , , , , , , , ,

[Click here for a PDF of this post with nicer formatting]

Motivation

Geometric algebra (GA) allows for a compact description of Maxwell’s equations in either an explicit 3D representation or a STA (SpaceTime Algebra [2]) representation. The 3D GA and STA representations Maxwell’s equation both the form

\begin{equation}\label{eqn:potentialMethods:1280}
L \boldsymbol{\mathcal{F}} = J,
\end{equation}

where \( J \) represents the sources, \( L \) is a multivector gradient operator that includes partial derivative operator components for each of the space and time coordinates, and

\begin{equation}\label{eqn:potentialMethods:1020}
\boldsymbol{\mathcal{F}} = \boldsymbol{\mathcal{E}} + \eta I \boldsymbol{\mathcal{H}},
\end{equation}

is an electromagnetic field multivector, \( I = \Be_1 \Be_2 \Be_3 \) is the \R{3} pseudoscalar, and \( \eta = \sqrt{\mu/\epsilon} \) is the impedance of the media.

When Maxwell’s equations are extended to include magnetic sources in addition to conventional electric sources (as used in antenna-theory [1] and microwave engineering [3]), they take the form

\begin{equation}\label{eqn:chapter3Notes:20}
\spacegrad \cross \boldsymbol{\mathcal{E}} = – \boldsymbol{\mathcal{M}} – \PD{t}{\boldsymbol{\mathcal{B}}}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:40}
\spacegrad \cross \boldsymbol{\mathcal{H}} = \boldsymbol{\mathcal{J}} + \PD{t}{\boldsymbol{\mathcal{D}}}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:60}
\spacegrad \cdot \boldsymbol{\mathcal{D}} = q_{\textrm{e}}
\end{equation}
\begin{equation}\label{eqn:chapter3Notes:80}
\spacegrad \cdot \boldsymbol{\mathcal{B}} = q_{\textrm{m}}.
\end{equation}

The corresponding GA Maxwell equations in their respective 3D and STA forms are

\begin{equation}\label{eqn:potentialMethods:300}
\lr{ \spacegrad + \inv{v} \PD{t}{} } \boldsymbol{\mathcal{F}}
=
\eta
\lr{ v q_{\textrm{e}} – \boldsymbol{\mathcal{J}} }
+ I \lr{ v q_{\textrm{m}} – \boldsymbol{\mathcal{M}} }
\end{equation}
\begin{equation}\label{eqn:potentialMethods:320}
\grad \boldsymbol{\mathcal{F}} = \eta J – I M,
\end{equation}

where the wave group velocity in the medium is \( v = 1/\sqrt{\epsilon\mu} \), and the medium is isotropic with
\( \boldsymbol{\mathcal{B}} = \mu \boldsymbol{\mathcal{H}} \), and \( \boldsymbol{\mathcal{D}} = \epsilon \boldsymbol{\mathcal{E}} \). In the STA representation, \( \grad, J, M \) are all four-vectors, the specific meanings of which will be spelled out below.

How to determine the potential equations and the field representation using the conventional distinct Maxwell’s \ref{eqn:chapter3Notes:20}, … is well known. The basic procedure is to consider the electric and magnetic sources in turn, and observe that in each case one of the electric or magnetic fields must have a curl representation. The STA approach is similar, except that it can be observed that the field must have a four-curl representation for each type of source. In the explicit 3D GA formalism
\ref{eqn:potentialMethods:300} how to formulate a natural potential representation is not as obvious. There is no longer an reason to set any component of the field equal to a curl, and the representation of the four curl from the STA approach is awkward. Additionally, it is not obvious what form gauge invariance takes in the 3D GA representation.

Ideas explored in these notes

  • GA representation of Maxwell’s equations including magnetic sources.
  • STA GA formalism for Maxwell’s equations including magnetic sources.
  • Explicit form of the GA potential representation including both electric and magnetic sources.
  • Demonstration of exactly how the 3D and STA potentials are related.
  • Explore the structure of gauge transformations when magnetic sources are included.
  • Explore the structure of gauge transformations in the 3D GA formalism.
  • Specify the form of the Lorentz gauge in the 3D GA formalism.

Traditional vector algebra

No magnetic sources

When magnetic sources are omitted, it follows from \ref{eqn:chapter3Notes:80} that there is some \( \boldsymbol{\mathcal{A}}^{\mathrm{e}} \) for which

\begin{equation}\label{eqn:potentialMethods:20}
\boxed{
\boldsymbol{\mathcal{B}} = \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{e}},
}
\end{equation}

Substitution into Faraday’s law \ref{eqn:chapter3Notes:20} gives

\begin{equation}\label{eqn:potentialMethods:40}
\spacegrad \cross \boldsymbol{\mathcal{E}} = – \PD{t}{}\lr{ \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{e}} },
\end{equation}

or
\begin{equation}\label{eqn:potentialMethods:60}
\spacegrad \cross \lr{ \boldsymbol{\mathcal{E}} + \PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} } } = 0.
\end{equation}

A gradient representation of this curled quantity, say \( -\spacegrad \phi \), will provide the required zero

\begin{equation}\label{eqn:potentialMethods:80}
\boxed{
\boldsymbol{\mathcal{E}} = -\spacegrad \phi -\PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} }.
}
\end{equation}

The final two Maxwell equations yield

\begin{equation}\label{eqn:potentialMethods:100}
\begin{aligned}
-\spacegrad^2 \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \spacegrad \lr{ \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}} } &= \mu \lr{ \boldsymbol{\mathcal{J}} + \epsilon \PD{t}{} \lr{ -\spacegrad \phi -\PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} } } } \\
\spacegrad \cdot \lr{ -\spacegrad \phi -\PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} } } &= q_e/\epsilon,
\end{aligned}
\end{equation}

or
\begin{equation}\label{eqn:potentialMethods:120}
\boxed{
\begin{aligned}
\spacegrad^2 \boldsymbol{\mathcal{A}}^{\mathrm{e}} – \inv{v^2} \PDSq{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} }
– \spacegrad \lr{
\inv{v^2} \PD{t}{\phi}
+\spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}}
}
&= -\mu \boldsymbol{\mathcal{J}} \\
\spacegrad^2 \phi + \PD{t}{} \lr{ \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}} } &= -q_e/\epsilon.
\end{aligned}
}
\end{equation}

Note that the Lorentz condition \( \PDi{t}{(\phi/v^2)} + \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}} = 0 \) can be imposed to decouple these, leaving non-homogeneous wave equations for the vector and scalar potentials respectively.

No electric sources

Without electric sources, a curl representation of the electric field can be assumed, satisfying Gauss’s law

\begin{equation}\label{eqn:potentialMethods:140}
\boxed{
\boldsymbol{\mathcal{D}} = – \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{m}}.
}
\end{equation}

Substitution into the Maxwell-Faraday law gives
\begin{equation}\label{eqn:potentialMethods:160}
\spacegrad \cross \lr{ \boldsymbol{\mathcal{H}} + \PD{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}} } = 0.
\end{equation}

This is satisfied with any gradient, say, \( -\spacegrad \phi_m \), providing a potential representation for the magnetic field

\begin{equation}\label{eqn:potentialMethods:180}
\boxed{
\boldsymbol{\mathcal{H}} = -\spacegrad \phi_m – \PD{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}}.
}
\end{equation}

The remaining Maxwell equations provide the required constraints on the potentials

\begin{equation}\label{eqn:potentialMethods:220}
-\spacegrad^2 \boldsymbol{\mathcal{A}}^{\mathrm{m}} + \spacegrad \lr{ \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{m}} } = -\epsilon
\lr{
-\boldsymbol{\mathcal{M}} – \mu \PD{t}{}
\lr{
-\spacegrad \phi_m – \PD{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}}
}
}
\end{equation}
\begin{equation}\label{eqn:potentialMethods:240}
\spacegrad \cdot
\lr{
-\spacegrad \phi_m – \PD{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}}
}
= \inv{\mu} q_m,
\end{equation}

or
\begin{equation}\label{eqn:potentialMethods:260}
\boxed{
\begin{aligned}
\spacegrad^2 \boldsymbol{\mathcal{A}}^{\mathrm{m}} – \inv{v^2} \PDSq{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}} – \spacegrad \lr{ \inv{v^2} \PD{t}{\phi_m} + \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{m}} } &= -\epsilon \boldsymbol{\mathcal{M}} \\
\spacegrad^2 \phi_m + \PD{t}{}\lr{ \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{m}} } &= -\inv{\mu} q_m.
\end{aligned}
}
\end{equation}

The general solution to Maxwell’s equations is therefore
\begin{equation}\label{eqn:potentialMethods:280}
\begin{aligned}
\boldsymbol{\mathcal{E}} &=
-\spacegrad \phi -\PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} }
– \inv{\epsilon} \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{m}} \\
\boldsymbol{\mathcal{H}} &=
\inv{\mu} \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{e}}
-\spacegrad \phi_m – \PD{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}},
\end{aligned}
\end{equation}

subject to the constraints \ref{eqn:potentialMethods:120} and \ref{eqn:potentialMethods:260}.

Potential operator structure

Knowing that there is a simple underlying structure to the potential representation of the electromagnetic field in the STA formalism inspires the question of whether that structure can be found directly using the scalar and vector potentials determined above.

Specifically, what is the multivector representation \ref{eqn:potentialMethods:1020} of the electromagnetic field in terms of all the individual potential variables, and can an underlying structure for that field representation be found? The composite field is

\begin{equation}\label{eqn:potentialMethods:280b}
\boldsymbol{\mathcal{F}}
=
-\spacegrad \phi -\PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} }
– \inv{\epsilon} \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{m}} \\
+ I \eta
\lr{
\inv{\mu} \spacegrad \cross \boldsymbol{\mathcal{A}}^{\mathrm{e}}
-\spacegrad \phi_m – \PD{t}{\boldsymbol{\mathcal{A}}^{\mathrm{m}}}
}.
\end{equation}

Can this be factored into into multivector operator and multivector potentials? Expanding the cross products provides some direction

\begin{equation}\label{eqn:potentialMethods:1040}
\begin{aligned}
\boldsymbol{\mathcal{F}}
&=
– \PD{t}{ \boldsymbol{\mathcal{A}}^{\mathrm{e}} }
– \eta \PD{t}{I \boldsymbol{\mathcal{A}}^{\mathrm{m}}}
– \spacegrad \lr{ \phi – \eta I \phi_m } \\
&\quad + \frac{\eta}{2 \mu} \lr{ \rspacegrad \boldsymbol{\mathcal{A}}^{\mathrm{e}} – \boldsymbol{\mathcal{A}}^{\mathrm{e}} \lspacegrad }
+ \frac{1}{2 \epsilon} \lr{ \rspacegrad I \boldsymbol{\mathcal{A}}^{\mathrm{m}} – I \boldsymbol{\mathcal{A}}^{\mathrm{m}} \lspacegrad }.
\end{aligned}
\end{equation}

Observe that the
gradient and the time partials can be grouped together

\begin{equation}\label{eqn:potentialMethods:1060}
\begin{aligned}
\boldsymbol{\mathcal{F}}
&=
– \PD{t}{ } \lr{\boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta I \boldsymbol{\mathcal{A}}^{\mathrm{m}}}
– \spacegrad \lr{ \phi + \eta I \phi_m }
+ \frac{v}{2} \lr{ \rspacegrad (\boldsymbol{\mathcal{A}}^{\mathrm{e}} + I \eta \boldsymbol{\mathcal{A}}^{\mathrm{m}}) – (\boldsymbol{\mathcal{A}}^{\mathrm{e}} + I \eta \boldsymbol{\mathcal{A}}^{\mathrm{m}}) \lspacegrad } \\
&=
\inv{2} \lr{
\lr{ \rspacegrad – \inv{v} {\stackrel{ \rightarrow }{\partial_t}} } \lr{ v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta v I \boldsymbol{\mathcal{A}}^{\mathrm{m}} }
–
\lr{ v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta v I \boldsymbol{\mathcal{A}}^{\mathrm{m}}} \lr{ \lspacegrad + \inv{v} {\stackrel{ \leftarrow }{\partial_t}} }
} \\
&+\quad \inv{2} \lr{
\lr{ \rspacegrad – \inv{v} {\stackrel{ \rightarrow }{\partial_t}} } \lr{ -\phi – \eta I \phi_m }
– \lr{ \phi + \eta I \phi_m } \lr{ \lspacegrad + \inv{v} {\stackrel{ \leftarrow }{\partial_t}} }
}
,
\end{aligned}
\end{equation}

or

\begin{equation}\label{eqn:potentialMethods:1080}
\boxed{
\boldsymbol{\mathcal{F}}
=
\inv{2} \Biglr{
\lr{ \rspacegrad – \inv{v} {\stackrel{ \rightarrow }{\partial_t}} }
\lr{
– \phi
+ v \boldsymbol{\mathcal{A}}^{\mathrm{e}}
+ \eta I v \boldsymbol{\mathcal{A}}^{\mathrm{m}}
– \eta I \phi_m
}
–
\lr{
\phi
+ v \boldsymbol{\mathcal{A}}^{\mathrm{e}}
+ \eta I v \boldsymbol{\mathcal{A}}^{\mathrm{m}}
+ \eta I \phi_m
}
\lr{ \lspacegrad + \inv{v} {\stackrel{ \leftarrow }{\partial_t}} }
}
.
}
\end{equation}

There’s a conjugate structure to the potential on each side of the curl operation where we see a sign change for the scalar and pseudoscalar elements only. The reason for this becomes more clear in the STA formalism.

Potentials in the STA formalism.

Maxwell’s equation in its explicit 3D form \ref{eqn:potentialMethods:300} can be
converted to STA form, by introducing a four-vector basis \( \setlr{ \gamma_\mu } \), where the spatial basis
\( \setlr{ \Be_k = \gamma_k \gamma_0 } \)
is expressed in terms of the Dirac basis \( \setlr{ \gamma_\mu } \).
By multiplying from the left with \( \gamma_0 \) a STA form of Maxwell’s equation
\ref{eqn:potentialMethods:320}
is obtained,
where
\begin{equation}\label{eqn:potentialMethods:340}
\begin{aligned}
J &= \gamma^\mu J_\mu = ( v q_e, \boldsymbol{\mathcal{J}} ) \\
M &= \gamma^\mu M_\mu = ( v q_m, \boldsymbol{\mathcal{M}} ) \\
\grad &= \gamma^\mu \partial_\mu = ( (1/v) \partial_t, \spacegrad ) \\
I &= \gamma_0 \gamma_1 \gamma_2 \gamma_3,
\end{aligned}
\end{equation}

Here the metric choice is \( \gamma_0^2 = 1 = -\gamma_k^2 \). Note that in this representation the electromagnetic field \( \boldsymbol{\mathcal{F}} = \boldsymbol{\mathcal{E}} + \eta I \boldsymbol{\mathcal{H}} \) is a bivector, not a multivector as it is explicit (frame dependent) 3D representation of \ref{eqn:potentialMethods:300}.

A potential representation can be obtained as before by considering electric and magnetic sources in sequence and using superposition to assemble a complete potential.

No magnetic sources

Without magnetic sources, Maxwell’s equation splits into vector and trivector terms of the form

\begin{equation}\label{eqn:potentialMethods:380}
\grad \cdot \boldsymbol{\mathcal{F}} = \eta J
\end{equation}
\begin{equation}\label{eqn:potentialMethods:400}
\grad \wedge \boldsymbol{\mathcal{F}} = 0.
\end{equation}

A four-vector curl representation of the field will satisfy \ref{eqn:potentialMethods:400} allowing an immediate potential solution

\begin{equation}\label{eqn:potentialMethods:560}
\boxed{
\begin{aligned}
&\boldsymbol{\mathcal{F}} = \grad \wedge {A^{\mathrm{e}}} \\
&\grad^2 {A^{\mathrm{e}}} – \grad \lr{ \grad \cdot {A^{\mathrm{e}}} } = \eta J.
\end{aligned}
}
\end{equation}

This can be put into correspondence with \ref{eqn:potentialMethods:120} by noting that

\begin{equation}\label{eqn:potentialMethods:460}
\begin{aligned}
\grad^2 &= (\gamma^\mu \partial_\mu) \cdot (\gamma^\nu \partial_\nu) = \inv{v^2} \partial_{tt} – \spacegrad^2 \\
\gamma_0 {A^{\mathrm{e}}} &= \gamma_0 \gamma^\mu {A^{\mathrm{e}}}_\mu = {A^{\mathrm{e}}}_0 + \Be_k {A^{\mathrm{e}}}_k = {A^{\mathrm{e}}}_0 + \BA^{\mathrm{e}} \\
\gamma_0 \grad &= \gamma_0 \gamma^\mu \partial_\mu = \inv{v} \partial_t + \spacegrad \\
\grad \cdot {A^{\mathrm{e}}} &= \partial_\mu {A^{\mathrm{e}}}^\mu = \inv{v} \partial_t {A^{\mathrm{e}}}_0 – \spacegrad \cdot \BA^{\mathrm{e}},
\end{aligned}
\end{equation}

so multiplying from the left with \( \gamma_0 \) gives

\begin{equation}\label{eqn:potentialMethods:480}
\lr{ \inv{v^2} \partial_{tt} – \spacegrad^2 } \lr{ {A^{\mathrm{e}}}_0 + \BA^{\mathrm{e}} } – \lr{ \inv{v} \partial_t + \spacegrad }\lr{ \inv{v} \partial_t {A^{\mathrm{e}}}_0 – \spacegrad \cdot \BA^{\mathrm{e}} } = \eta( v q_e – \boldsymbol{\mathcal{J}} ),
\end{equation}

or

\begin{equation}\label{eqn:potentialMethods:520}
\lr{ \inv{v^2} \partial_{tt} – \spacegrad^2 } \BA^{\mathrm{e}} – \spacegrad \lr{ \inv{v} \partial_t {A^{\mathrm{e}}}_0 – \spacegrad \cdot \BA^{\mathrm{e}} } = -\eta \boldsymbol{\mathcal{J}}
\end{equation}
\begin{equation}\label{eqn:potentialMethods:540}
\spacegrad^2 {A^{\mathrm{e}}}_0 – \inv{v} \partial_t \lr{ \spacegrad \cdot \BA^{\mathrm{e}} } = -q_e/\epsilon.
\end{equation}

So \( {A^{\mathrm{e}}}_0 = \phi \) and \( -\ifrac{\BA^{\mathrm{e}}}{v} = \boldsymbol{\mathcal{A}}^{\mathrm{e}} \), or

\begin{equation}\label{eqn:potentialMethods:600}
\boxed{
{A^{\mathrm{e}}} = \gamma_0\lr{ \phi – v \boldsymbol{\mathcal{A}}^{\mathrm{e}} }.
}
\end{equation}

No electric sources

Without electric sources, Maxwell’s equation now splits into

\begin{equation}\label{eqn:potentialMethods:640}
\grad \cdot \boldsymbol{\mathcal{F}} = 0
\end{equation}
\begin{equation}\label{eqn:potentialMethods:660}
\grad \wedge \boldsymbol{\mathcal{F}} = -I M.
\end{equation}

Here the dual of an STA curl yields a solution

\begin{equation}\label{eqn:potentialMethods:680}
\boxed{
\boldsymbol{\mathcal{F}} = I ( \grad \wedge {A^{\mathrm{m}}} ).
}
\end{equation}

Substituting this gives

\begin{equation}\label{eqn:potentialMethods:720}
\begin{aligned}
0
&=
\grad \cdot (I ( \grad \wedge {A^{\mathrm{m}}} ) ) \\
&=
\gpgradeone{ \grad I ( \grad \wedge {A^{\mathrm{m}}} ) } \\
&=
-I \grad \wedge ( \grad \wedge {A^{\mathrm{m}}} ).
\end{aligned}
\end{equation}
\begin{equation}\label{eqn:potentialMethods:740}
\begin{aligned}
-I M
&=
\grad \wedge (I ( \grad \wedge {A^{\mathrm{m}}} ) ) \\
&=
\gpgradethree{ \grad I ( \grad \wedge {A^{\mathrm{m}}} ) } \\
&=
-I \grad \cdot ( \grad \wedge {A^{\mathrm{m}}} ).
\end{aligned}
\end{equation}

The \( \grad \cdot \boldsymbol{\mathcal{F}} \) relation \ref{eqn:potentialMethods:720} is identically zero as desired, leaving

\begin{equation}\label{eqn:potentialMethods:760}
\boxed{
\grad^2 {A^{\mathrm{m}}} – \grad \lr{ \grad \cdot {A^{\mathrm{m}}} }
=
M.
}
\end{equation}

So the general solution with both electric and magnetic sources is

\begin{equation}\label{eqn:potentialMethods:800}
\boxed{
\boldsymbol{\mathcal{F}} = \grad \wedge {A^{\mathrm{e}}} + I (\grad \wedge {A^{\mathrm{m}}}),
}
\end{equation}

subject to the constraints of \ref{eqn:potentialMethods:560} and \ref{eqn:potentialMethods:760}. As before the four-potential \( {A^{\mathrm{m}}} \) can be put into correspondence with the conventional scalar and vector potentials by left multiplying with \( \gamma_0 \), which gives

\begin{equation}\label{eqn:potentialMethods:820}
\lr{ \inv{v^2} \partial_{tt} – \spacegrad^2 } \lr{ {A^{\mathrm{m}}}_0 + \BA^{\mathrm{m}} } – \lr{ \inv{v} \partial_t + \spacegrad }\lr{ \inv{v} \partial_t {A^{\mathrm{m}}}_0 – \spacegrad \cdot \BA^{\mathrm{m}} } = v q_m – \boldsymbol{\mathcal{M}},
\end{equation}

or
\begin{equation}\label{eqn:potentialMethods:860}
\lr{ \inv{v^2} \partial_{tt} – \spacegrad^2 } \BA^{\mathrm{m}} – \spacegrad \lr{ \inv{v} \partial_t {A^{\mathrm{m}}}_0 – \spacegrad \cdot \BA^{\mathrm{m}} } = – \boldsymbol{\mathcal{M}}
\end{equation}
\begin{equation}\label{eqn:potentialMethods:880}
\spacegrad^2 {A^{\mathrm{m}}}_0 – \inv{v} \partial_t \spacegrad \cdot \BA^{\mathrm{m}} = -v q_m.
\end{equation}

Comparing with \ref{eqn:potentialMethods:260} shows that \( {A^{\mathrm{m}}}_0/v = \mu \phi_m \) and \( -\ifrac{\BA^{\mathrm{m}}}{v^2} = \mu \boldsymbol{\mathcal{A}}^{\mathrm{m}} \), or

\begin{equation}\label{eqn:potentialMethods:900}
\boxed{
{A^{\mathrm{m}}} = \gamma_0 \eta \lr{ \phi_m – v \boldsymbol{\mathcal{A}}^{\mathrm{m}} }.
}
\end{equation}

Potential operator structure

Observe that there is an underlying uniform structure of the differential operator that acts on the potential to produce the electromagnetic field. Expressed as a linear operator of the
gradient and the potentials, that is

\( \boldsymbol{\mathcal{F}} = L(\lrgrad, {A^{\mathrm{e}}}, {A^{\mathrm{m}}}) \)

\begin{equation}\label{eqn:potentialMethods:980}
\begin{aligned}
\boldsymbol{\mathcal{F}}
&=
L(\grad, {A^{\mathrm{e}}}, {A^{\mathrm{m}}}) \\
&= \grad \wedge {A^{\mathrm{e}}} + I (\grad \wedge {A^{\mathrm{m}}}) \\
&=
\inv{2} \lr{ \rgrad {A^{\mathrm{e}}} – {A^{\mathrm{e}}} \lgrad }
+ \frac{I}{2} \lr{ \rgrad {A^{\mathrm{m}}} – {A^{\mathrm{m}}} \lgrad } \\
&=
\inv{2} \lr{ \rgrad {A^{\mathrm{e}}} – {A^{\mathrm{e}}} \lgrad }
+ \frac{1}{2} \lr{ -\rgrad I {A^{\mathrm{m}}} – I {A^{\mathrm{m}}} \lgrad } \\
&=
\inv{2} \lr{ \rgrad ({A^{\mathrm{e}}} -I {A^{\mathrm{m}}}) – ({A^{\mathrm{e}}} + I {A^{\mathrm{m}}}) \lgrad }
,
\end{aligned}
\end{equation}

or
\begin{equation}\label{eqn:potentialMethods:1000}
\boxed{
\boldsymbol{\mathcal{F}}
=
\inv{2} \lr{ \rgrad ({A^{\mathrm{e}}} -I {A^{\mathrm{m}}}) – ({A^{\mathrm{e}}} – I {A^{\mathrm{m}}})^\dagger \lgrad }
.
}
\end{equation}

Observe that \ref{eqn:potentialMethods:1000} can be
put into correspondence with \ref{eqn:potentialMethods:1080} using a factoring of unity \( 1 = \gamma_0 \gamma_0 \)

\begin{equation}\label{eqn:potentialMethods:1100}
\boldsymbol{\mathcal{F}}
=
\inv{2} \lr{ (-\rgrad \gamma_0) (-\gamma_0 ({A^{\mathrm{e}}} -I {A^{\mathrm{m}}})) – (({A^{\mathrm{e}}} + I {A^{\mathrm{m}}}) \gamma_0)(\gamma_0 \lgrad) },
\end{equation}

where

\begin{equation}\label{eqn:potentialMethods:1140}
\begin{aligned}
-\grad \gamma_0
&=
-(\gamma^0 \partial_0 + \gamma^k \partial_k) \gamma_0 \\
&=
-\partial_0 – \gamma^k \gamma_0 \partial_k \\
&=
\spacegrad
-\inv{v} \partial_t
,
\end{aligned}
\end{equation}
\begin{equation}\label{eqn:potentialMethods:1160}
\begin{aligned}
\gamma_0 \grad
&=
\gamma_0 (\gamma^0 \partial_0 + \gamma^k \partial_k) \\
&=
\partial_0 – \gamma^k \gamma_0 \partial_k \\
&=
\spacegrad
+ \inv{v} \partial_t
,
\end{aligned}
\end{equation}

and
\begin{equation}\label{eqn:potentialMethods:1200}
\begin{aligned}
-\gamma_0 ( {A^{\mathrm{e}}} – I {A^{\mathrm{m}}} )
&=
-\gamma_0 \gamma_0 \lr{ \phi -v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta I \lr{ \phi_m – v \boldsymbol{\mathcal{A}}^{\mathrm{m}} } } \\
&=
-\lr{ \phi -v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta I \phi_m – \eta v I \boldsymbol{\mathcal{A}}^{\mathrm{m}} } \\
&=
– \phi
+ v \boldsymbol{\mathcal{A}}^{\mathrm{e}}
+ \eta v I \boldsymbol{\mathcal{A}}^{\mathrm{m}}
– \eta I \phi_m
\end{aligned}
\end{equation}
\begin{equation}\label{eqn:potentialMethods:1220}
\begin{aligned}
( {A^{\mathrm{e}}} + I {A^{\mathrm{m}}} )\gamma_0
&=
\lr{ \gamma_0 \lr{ \phi -v \boldsymbol{\mathcal{A}}^{\mathrm{e}} } + I \gamma_0 \eta \lr{ \phi_m – v \boldsymbol{\mathcal{A}}^{\mathrm{m}} } } \gamma_0 \\
&=
\phi + v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + I \eta \phi_m + I \eta v \boldsymbol{\mathcal{A}}^{\mathrm{m}} \\
&=
\phi
+ v \boldsymbol{\mathcal{A}}^{\mathrm{e}}
+ \eta v I \boldsymbol{\mathcal{A}}^{\mathrm{m}}
+ \eta I \phi_m
,
\end{aligned}
\end{equation}

This recovers \ref{eqn:potentialMethods:1080} as desired.

Potentials in the 3D Euclidean formalism

In the conventional scalar plus vector differential representation of Maxwell’s equations \ref{eqn:chapter3Notes:20}…, given electric(magnetic) sources the structure of the electric(magnetic) potential follows from first setting the magnetic(electric) field equal to the curl of a vector potential. The procedure for the STA GA form of Maxwell’s equation was similar, where it was immediately evident that the field could be set to the four-curl of a four-vector potential (or the dual of such a curl for magnetic sources).

In the 3D GA representation, there is no immediate rationale for introducing a curl or the equivalent to a four-curl representation of the field. Reconciliation of this is possible by recognizing that the fact that the field (or a component of it) may be represented by a curl is not actually fundamental. Instead, observe that the two sided gradient action on a potential to generate the electromagnetic field in the STA representation of \ref{eqn:potentialMethods:1000} serves to select the grade two component product of the gradient and the multivector potential \( {A^{\mathrm{e}}} – I {A^{\mathrm{m}}} \), and that this can in fact be written as
a single sided gradient operation on a potential, provided the multivector product is filtered with a four-bivector grade selection operation

\begin{equation}\label{eqn:potentialMethods:1240}
\boxed{
\boldsymbol{\mathcal{F}} = \gpgradetwo{ \grad \lr{ {A^{\mathrm{e}}} – I {A^{\mathrm{m}}} } }.
}
\end{equation}

Similarly, it can be observed that the
specific function of the conjugate structure in the two sided potential representation of
\ref{eqn:potentialMethods:1080}
is to discard all the scalar and pseudoscalar grades in the multivector product. This means that a single sided potential can also be used, provided it is wrapped in a grade selection operation

\begin{equation}\label{eqn:potentialMethods:1260}
\boxed{
\boldsymbol{\mathcal{F}} =
\gpgrade{ \lr{ \spacegrad – \inv{v} \PD{t}{} }
\lr{
– \phi
+ v \boldsymbol{\mathcal{A}}^{\mathrm{e}}
+ \eta I v \boldsymbol{\mathcal{A}}^{\mathrm{m}}
– \eta I \phi_m
} }{1,2}.
}
\end{equation}

It is this grade selection operation that is really the fundamental defining action in the potential of the STA and conventional 3D representations of Maxwell’s equations. So, given Maxwell’s equation in the 3D GA representation, defining a potential representation for the field is really just a demand that the field have the structure

\begin{equation}\label{eqn:potentialMethods:1320}
\boldsymbol{\mathcal{F}} = \gpgrade{ (\alpha \spacegrad + \beta \partial_t)( A_0 + A_1 + I( A_0′ + A_1′ ) }{1,2}.
\end{equation}

This is a mandate that the electromagnetic field is the grades 1 and 2 components of the vector product of space and time derivative operators on a multivector field \( A = \sum_{k=0}^3 A_k = A_0 + A_1 + I( A_0′ + A_1′ ) \) that can potentially have any grade components. There are more degrees of freedom in this specification than required, since the multivector can absorb one of the \( \alpha \) or \( \beta \) coefficients, so without loss of generality, one of these (say \( \alpha\)) can be set to 1.

Expanding \ref{eqn:potentialMethods:1320} gives

\begin{equation}\label{eqn:potentialMethods:1340}
\begin{aligned}
\boldsymbol{\mathcal{F}}
&=
\spacegrad A_0
+ \beta \partial_t A_1
– \spacegrad \cross A_1′
+ I (\spacegrad \cross A_1
+ \beta \partial_t A_1′
+ \spacegrad A_0′) \\
&=
\boldsymbol{\mathcal{E}} + I \eta \boldsymbol{\mathcal{H}}.
\end{aligned}
\end{equation}

This naturally has all the right mixes of curls, gradients and time derivatives, all following as direct consequences of applying a grade selection operation to the action of a “spacetime gradient” on a general multivector potential.

The conclusion is that the potential representation of the field is

\begin{equation}\label{eqn:potentialMethods:1360}
\boldsymbol{\mathcal{F}} =
\gpgrade{ \lr{ \spacegrad – \inv{v} \PD{t}{} } A }{1,2},
\end{equation}

where \( A \) is a multivector potentially containing all grades, where grades 0,1 are required for electric sources, and grades 2,3 are required for magnetic sources. When it is desirable to refer back to the conventional scalar and vector potentials this multivector potential can be written as \( A = -\phi + v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta I \lr{ -\phi_m + v \boldsymbol{\mathcal{A}}^{\mathrm{m}} } \).

Gauge transformations

Recall that for electric sources the magnetic field is of the form

\begin{equation}\label{eqn:potentialMethods:1380}
\boldsymbol{\mathcal{B}} = \spacegrad \cross \boldsymbol{\mathcal{A}},
\end{equation}

so adding the gradient of any scalar field to the potential \( \boldsymbol{\mathcal{A}}’ = \boldsymbol{\mathcal{A}} + \spacegrad \psi \)
does not change the magnetic field

\begin{equation}\label{eqn:potentialMethods:1400}
\begin{aligned}
\boldsymbol{\mathcal{B}}’
&= \spacegrad \cross \lr{ \boldsymbol{\mathcal{A}} + \spacegrad \psi } \\
&= \spacegrad \cross \boldsymbol{\mathcal{A}} \\
&= \boldsymbol{\mathcal{B}}.
\end{aligned}
\end{equation}

The electric field with this changed potential is

\begin{equation}\label{eqn:potentialMethods:1420}
\begin{aligned}
\boldsymbol{\mathcal{E}}’
&= -\spacegrad \phi – \partial_t \lr{ \BA + \spacegrad \psi} \\
&= -\spacegrad \lr{ \phi + \partial_t \psi } – \partial_t \BA,
\end{aligned}
\end{equation}

so if
\begin{equation}\label{eqn:potentialMethods:1440}
\phi = \phi’ – \partial_t \psi,
\end{equation}

the electric field will also be unaltered by this transformation.

In the STA representation, the field can similarly be altered by adding any (four)gradient to the potential. For example with only electric sources

\begin{equation}\label{eqn:potentialMethods:1460}
\boldsymbol{\mathcal{F}} = \grad \wedge (A + \grad \psi) = \grad \wedge A
\end{equation}

and for electric or magnetic sources

\begin{equation}\label{eqn:potentialMethods:1480}
\boldsymbol{\mathcal{F}} = \gpgradetwo{ \grad (A + \grad \psi) } = \gpgradetwo{ \grad A }.
\end{equation}

In the 3D GA representation, where the field is given by \ref{eqn:potentialMethods:1360}, there is no field that is being curled to add a gradient to. However, if the scalar and vector potentials transform as

\begin{equation}\label{eqn:potentialMethods:1500}
\begin{aligned}
\boldsymbol{\mathcal{A}} &\rightarrow \boldsymbol{\mathcal{A}} + \spacegrad \psi \\
\phi &\rightarrow \phi – \partial_t \psi,
\end{aligned}
\end{equation}

then the multivector potential transforms as
\begin{equation}\label{eqn:potentialMethods:1520}
-\phi + v \boldsymbol{\mathcal{A}}
\rightarrow -\phi + v \boldsymbol{\mathcal{A}} + \partial_t \psi + v \spacegrad \psi,
\end{equation}

so the electromagnetic field is unchanged when the multivector potential is transformed as

\begin{equation}\label{eqn:potentialMethods:1540}
A \rightarrow A + \lr{ \spacegrad + \inv{v} \partial_t } \psi,
\end{equation}

where \( \psi \) is any field that has scalar or pseudoscalar grades. Viewed in terms of grade selection, this makes perfect sense, since the transformed field is

\begin{equation}\label{eqn:potentialMethods:1560}
\begin{aligned}
\boldsymbol{\mathcal{F}}
&\rightarrow
\gpgrade{ \lr{ \spacegrad – \inv{v} \PD{t}{} } \lr{ A + \lr{ \spacegrad + \inv{v} \partial_t } \psi } }{1,2} \\
&=
\gpgrade{ \lr{ \spacegrad – \inv{v} \PD{t}{} } A + \lr{ \spacegrad^2 – \inv{v^2} \partial_{tt} } \psi }{1,2} \\
&=
\gpgrade{ \lr{ \spacegrad – \inv{v} \PD{t}{} } A }{1,2}.
\end{aligned}
\end{equation}

The \( \psi \) contribution to the grade selection operator is killed because it has scalar or pseudoscalar grades.

Lorenz gauge

Maxwell’s equations are completely decoupled if the potential can be found such that

\begin{equation}\label{eqn:potentialMethods:1580}
\begin{aligned}
\boldsymbol{\mathcal{F}}
&=
\gpgrade{ \lr{ \spacegrad – \inv{v} \PD{t}{} } A }{1,2} \\
&=
\lr{ \spacegrad – \inv{v} \PD{t}{} } A.
\end{aligned}
\end{equation}

When this is the case, Maxwell’s equations are reduced to four non-homogeneous potential wave equations

\begin{equation}\label{eqn:potentialMethods:1620}
\lr{ \spacegrad^2 – \inv{v^2} \PDSq{t}{} } A = J,
\end{equation}

that is

\begin{equation}\label{eqn:potentialMethods:1600}
\begin{aligned}
\lr{ \spacegrad^2 – \inv{v^2} \PDSq{t}{} } \phi &= – \inv{\epsilon} q_e \\
\lr{ \spacegrad^2 – \inv{v^2} \PDSq{t}{} } \boldsymbol{\mathcal{A}}^{\mathrm{e}} &= – \mu \boldsymbol{\mathcal{J}} \\
\lr{ \spacegrad^2 – \inv{v^2} \PDSq{t}{} } \phi_m &= – \frac{I}{\mu} q_m \\
\lr{ \spacegrad^2 – \inv{v^2} \PDSq{t}{} } \boldsymbol{\mathcal{A}}^{\mathrm{m}} &= – I \epsilon \boldsymbol{\mathcal{M}}.
\end{aligned}
\end{equation}

There should be no a-priori assumption that such a field representation has no scalar, nor no pseudoscalar components. That explicit expansion in grades is

\begin{equation}\label{eqn:potentialMethods:1640}
\begin{aligned}
\lr{ \spacegrad – \inv{v} \PD{t}{} } A
&=
\lr{ \spacegrad – \inv{v} \PD{t}{} } \lr{ -\phi + v \boldsymbol{\mathcal{A}}^{\mathrm{e}} + \eta I \lr{ -\phi_m + v \boldsymbol{\mathcal{A}}^{\mathrm{m}} } } \\
&=
\inv{v} \partial_t \phi
+ v \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}} \\
&-\spacegrad \phi
+ I \eta v \spacegrad \wedge \boldsymbol{\mathcal{A}}^{\mathrm{m}}
– \partial_t \boldsymbol{\mathcal{A}}^{\mathrm{e}} \\
&+ v \spacegrad \wedge \boldsymbol{\mathcal{A}}^{\mathrm{e}}
– \eta I \spacegrad \phi_m
– I \eta \partial_t \boldsymbol{\mathcal{A}}^{\mathrm{m}} \\
&+ \eta I \inv{v} \partial_t \phi_m
+ I \eta v \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{m}},
\end{aligned}
\end{equation}

so if this potential representation has only vector and bivector grades, it must be true that

\begin{equation}\label{eqn:potentialMethods:1660}
\begin{aligned}
\inv{v} \partial_t \phi + v \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}} &= 0 \\
\inv{v} \partial_t \phi_m + v \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{m}} &= 0.
\end{aligned}
\end{equation}

The first is the well known Lorenz gauge condition, whereas the second is the dual of that condition for magnetic sources.

Should one of these conditions, say the Lorenz condition for the electric source potentials, be non-zero, then it is possible to make a potential transformation for which this condition is zero

\begin{equation}\label{eqn:potentialMethods:1680}
\begin{aligned}
0
&\ne
\inv{v} \partial_t \phi + v \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}} \\
&=
\inv{v} \partial_t (\phi’ – \partial_t \psi) + v \spacegrad \cdot (\boldsymbol{\mathcal{A}}’ + \spacegrad \psi) \\
&=
\inv{v} \partial_t \phi’ + v \spacegrad \boldsymbol{\mathcal{A}}’
+ v \lr{ \spacegrad^2 – \inv{v^2} \partial_{tt} } \psi,
\end{aligned}
\end{equation}

so if \( \inv{v} \partial_t \phi’ + v \spacegrad \boldsymbol{\mathcal{A}}’ \) is zero, \( \psi \) must be found such that
\begin{equation}\label{eqn:potentialMethods:1700}
\inv{v} \partial_t \phi + v \spacegrad \cdot \boldsymbol{\mathcal{A}}^{\mathrm{e}}
= v \lr{ \spacegrad^2 – \inv{v^2} \partial_{tt} } \psi.
\end{equation}

References

[1] Constantine A Balanis. Antenna theory: analysis and design. John Wiley \& Sons, 3rd edition, 2005.

[2] C. Doran and A.N. Lasenby. Geometric algebra for physicists. Cambridge University Press New York, Cambridge, UK, 1st edition, 2003.

[3] David M Pozar. Microwave engineering. John Wiley \& Sons, 2009.

Calculating the magnetostatic field from the moment

November 14, 2016 math and physics play , , , , , ,

[Click here for a PDF of this post with nicer formatting]

The vector potential, to first order, for a magnetostatic localized current distribution was found to be

\begin{equation}\label{eqn:magneticFieldFromMoment:20}
\BA(\Bx) = \frac{\mu_0}{4 \pi} \frac{\Bm \cross \Bx}{\Abs{\Bx}^3}.
\end{equation}

Initially, I tried to calculate the magnetic field from this, but ran into trouble. Here’s a new try.

\begin{equation}\label{eqn:magneticFieldFromMoment:40}
\begin{aligned}
\BB
&=
\frac{\mu_0}{4 \pi}
\spacegrad \cross \lr{ \Bm \cross \frac{\Bx}{r^3} } \\
&=
-\frac{\mu_0}{4 \pi}
\spacegrad \cdot \lr{ \Bm \wedge \frac{\Bx}{r^3} } \\
&=
-\frac{\mu_0}{4 \pi}
\lr{
(\Bm \cdot \spacegrad) \frac{\Bx}{r^3}
-\Bm \spacegrad \cdot \frac{\Bx}{r^3}
} \\
&=
\frac{\mu_0}{4 \pi}
\lr{
-\frac{(\Bm \cdot \spacegrad) \Bx}{r^3}
– \lr{ \Bm \cdot \lr{\spacegrad \inv{r^3} }} \Bx
+\Bm (\spacegrad \cdot \Bx) \inv{r^3}
+\Bm \lr{\spacegrad \inv{r^3} } \cdot \Bx
}.
\end{aligned}
\end{equation}

Here I’ve used \( \Ba \cross \lr{ \Bb \cross \Bc } = -\Ba \cdot \lr{ \Bb \wedge \Bc } \), and then expanded that with \( \Ba \cdot \lr{ \Bb \wedge \Bc } = (\Ba \cdot \Bb) \Bc – (\Ba \cdot \Bc) \Bb \). Since one of these vectors is the gradient, care must be taken to have it operate on the appropriate terms in such an expansion.

Since we have \( \spacegrad \cdot \Bx = 3 \), \( (\Bm \cdot \spacegrad) \Bx = \Bm \), and \( \spacegrad 1/r^n = -n \Bx/r^{n+2} \), this reduces to

\begin{equation}\label{eqn:magneticFieldFromMoment:60}
\begin{aligned}
\BB
&=
\frac{\mu_0}{4 \pi}
\lr{
– \frac{\Bm}{r^3}
+ 3 \frac{(\Bm \cdot \Bx) \Bx}{r^5} %
+ 3 \Bm \inv{r^3}
-3 \Bm \frac{\Bx}{r^5} \cdot \Bx
} \\
&=
\frac{\mu_0}{4 \pi}
\frac{3 (\Bm \cdot \ncap) \ncap -\Bm}{r^3},
\end{aligned}
\end{equation}

which is the desired result.